I also decided that this boat would have a center cosole and leaning post. I made the center console the same way I made the boat. I built a plug and covered it in foam, but I didn't glass it until I took it off the plug. The console didn't come off the plug as easily as the boat did though. I had to take the plug apart from the inside out.
Below is the wooden plug.
I left off the panel under the dash that forms the toe kick hoping that would allow the foam to pop off the plug easily. No such luck though. It took me 3 hours at least to get this console off the plug.
I pulled fillets along the hard corners on the inside and then glassed the inside as well.
No comments:
Post a Comment